Ring Camera Battery Life – How Long It Lasts?

Last updated on April 13th, 2024

Some of the Ring camera models use a battery pack for power. This is the only power source for these devices. So when it runs out, the camera stops working. That’s why you must know how long does Ring camera battery lasts so you can be prepared to do the needful.

You’ll need to recharge the battery, which usually takes 5 to 10 hours, and then insert it back into the device.

Let’s find out facts about Ring stick-up cam battery life so you can keep your security system running without long gaps.

Ring Camera battery life

Batteries used in Ring camera
Batteries used in Ring camera

A Ring camera battery life is 6 to 12 months on a complete recharge. This is, of course, under the ideal conditions where the camera isn’t affected by environmental conditions or gets frequently triggered due to road traffic. But in real life, the wireless Ring camera battery life is usually from a few weeks to a few months.

It also highly varies based on which model you are using. The stick-up camera, floodlight cam, and video doorbell run for different times on the same battery. And to clarify – all Ring cameras use the same type of battery, which is a rechargeable battery.

Factors affecting the camera’s run time

Factors affecting Ring camera run time
Factors affecting Ring camera run time

Ideally, a Ring camera’s battery life should be 6 to 12 months, but it usually runs out faster. Several factors affect battery life, and we are going to look at them one by one.

Environmental factors

First comes the environmental factors – moisture and heat. These cameras are designed in a way that moisture or rain shouldn’t affect their operation, but in reality, that cools down the camera more than usual. That makes the battery drain more power to keep up with regular operations.

This brings us to our next factor, which is heat. These cams are designed to operate in the temperature range of -20°C to 50°C. If the temperature of the surroundings goes beyond these limits, then the battery will drain faster.

Motion Detection Frequency

Ring camera is designed to handle up to 10,000 motion-triggered recordings on a single charge. The Ring camera battery charge time is around 6 hours. So, if you do the math, considering there are 365 days in a year, the sensor should only be triggered 27 times a day.

But does that happen? No, it usually gets triggered more times as even we ourselves are roaming around the house. So, if the camera is triggered more than 27 times a day, it won’t last for a year but deplete faster.

Live View time

The live view requires the most amount of power as it doesn’t just send live video but also exchanges audio both ways. Viewing the live feed for an extended period of time will drain your camera battery faster.

Consider that a single trigger event records for 20 seconds. So, viewing the feed for 5 minutes will drain more battery than 15 motion-triggered recordings. This proves that the more live views you access, the faster the battery will run out.

Wi-Fi Connectivity

Did you ever face an internet downtime? If you did, you must have noticed that the Ring devices go offline when there’s no Wi-Fi connectivity. Reconnecting to this network means the cam has to go through the process all over again. This drains more of their battery as the cam needs to be working till the Wi-Fi connection has been re-established.

What’s draining your Ring camera battery faster?

Steps to check the power draining devices
Steps to check the power draining devices

Are you wondering what exactly is draining the battery of your Ring camera? There’s a way to know that. You can check the power usage from your app and find out what feature is using the most amount of battery.

Step 1: Open the Ring app and go to the ‘Main Menu’ by clicking on the three horizontal lines.

Step 2: Open the ‘Devices’ tab and select the device you want to check.

Step 3: Open the cam ‘Settings’ and go to ‘Power Settings.’

Step 4: Click on ‘Feature Power Usage’ and click on the small arrow to the right of each feature to find out what is draining your camera battery faster.

Once you know what it is, you can work on avoiding that.

Tips to extend the battery life

It’s not possible to get the ideal battery life, but there are some things you can do to extend the run time. If you take these measures, your camera will last a bit longer.

Limit live-view access

As discussed earlier, live view consumes significantly more power than regular recording. If you could limit the number of times or the number of minutes you view the live camera, it could increase the runtime of your battery.

Ensure constant Wi-Fi connectivity

You must know that that are certain ways to ensure that your Wi-Fi connectivity is stable throughout the day. You can keep the router updated and close to the camera. Or get a Wi-Fi extender to ensure all the cams get sufficient signal. So camera won’t go offline, and it will not consume more energy to reconnect to the network.

Lower video recording time

You get to choose how much time your camera records when triggered by motion. It could be anywhere between 20 to 60 seconds. This setting can be done via the app. The less time the cam records, the less battery it will consume. This way, the cam could have an extended battery life.

Decrease motion sensitivity

Motion sensitivity is the measure of how much of a motion can trigger the camera. If you keep it high, even a leaf falling from the tree could trigger the cam. If you keep it too low, it sometimes doesn’t even capture a vehicle moving in front of it. It is best to keep it around 50%. So your cam won’t start recording that often, but it will also not miss important updates.

Set a schedule

You can disarm the cam when you are home so it won’t record unnecessary videos of you. So, instead of arming and disarming the cam, you can set a schedule. For instance, you can select the cam to be armed at 9 a.m. every day when you leave the house and disarm at 7 pm when you come back. So when you are home, you can limit the battery usage.

Add a solar panel

The best way to extend the run time of the camera is to install a solar panel attachment. This will take sunlight during the bay and charge the battery when its power is low. So your cam won’t ever run out of battery. Even if you have a few rainy days with no sunlight, the battery will run as it has enough power to go on for weeks.

Do you need to replace Ring camera batteries?

Yes, you need to replace Ring camera batteries after a few years. It is usually advised to buy a new battery for your camera every 3 to 5 years. This is because, after a certain number of charging and recharging cycles, the battery starts getting deteriorated. It needs to be replaced to get optimum performance.

You can find a replacement battery on the company’s official website or on Amazon.

Signs that your battery needs replacement

If you see the following signs in your camera battery, then it’s time to replace the old rechargeable battery with a brand new one:

  • The battery is draining out faster than usual.
  • It is taking longer and longer to charge every charging cycle.
  • The camera is abruptly going offline.
  • In the case of floodlights, the lights flicker when they are turned on.
  • The camera or video doorbell is getting heated more than acceptable.
  • Cameras are missing motion-triggered events.


Ring cameras have rechargeable batteries, so you don’t have to buy new batteries every time they run out of power. But you do need to replace them every few years so they don’t degrade completely.

On a single recharge, the battery should ideally work for 6 to 12 months. But depending on the weather and how often you use the camera, this time period will vary. You can take the above-mentioned measures to increase the runtime of your Ring camera battery.


Does Ring Spotlight use the same battery as other Ring cameras?

No, the Ring spotlight doesn’t use the same battery as the other Ring cameras. It requires four D cells.

Which battery is used by Ring cameras?

Ring cameras use a rechargeable Lithium Ion battery.

Photo of author

Siddhi Gurav

She is the editor and content writer at Smart Home Bulls. Siddhi merges her passion for language with SEO expertise. With 4 years of experience as a creative writer and a passion for smart home technology, she fits in perfectly at Smart Home Bulls. Her wide experience in content marketing has been an excellent addition to our team.

Leave a Comment